|
Get out of a tight spot with Buckingham Hydraulic Toe Jacks that have a minimum clearance of only 1 ¾". Whether you are supporting a steel frame substructure or lifting a modular, you’ll find plenty of applications for these heavy-duty jacks. They are rated at 7 ½ tons each and will lift up to 44". The 2 ½" bore size matches standard Crib Jacks for uniform lifting. 242 lbs.
| ||||||
|
TOE JACK ADAPTORS
|
TOE JACK TOP EXTENSIONS
|
|
Toe Jack Adaptors use a standard 17" Single-Acting Crib Jack Insert. Rated at 15 tons each and weighing 108 lbs without the jack, they will lift up to 17". These short Toe Jacks work well in tight spaces where you don't have the clearance for the large Toe Jacks.
SPEC SHEETS FOR TOE JACK ADAPTORS 
|
|
Buckingham Toe Jack Top Extensions with Screw-Tops add an extra 78"-110" collapsed height to our 44" Toe Jacks, and extend in 4" increments with safety pin for secure, controlled lifting.
| ||
Toe Jack Adaptor in extension
Workers use Toe Jacks to set a building section onto foundation pillars
Toe Jack Adaptors used to lift a triple brick house
Toe Jacks used to lower a house onto a steel frame
|
Buckingham Toe Jacks are used to lower a brick control house into place
Toe Jack Adaptors used to lift a triple brick house
Toe Jacks used to lift and support a tank undergoing repairs
|
Toe Jacks Lift a Modular Building Section from Trailer
|
Toe Jack w/ Toe Jack Top Extension Supports Interior Joist
|
Toe Jack w/ Toe Jack Top Extension w/ Screw-Top Extended
|
